3. Producción
Browse
Search Results
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Experimental characterization of chalcopyrite ball mill grinding processes in batch and continuous flow processing modes to reduce energy consumption(Elsevier, 2021-11-01)A mineralogy, rheology, and energy consumption-based experimental characterization of chalcopyrite ball mill grinding processes, in both batch and continuous flow processing modes, is carried out in this work. Accordingly, chalcopyrite ore samples are initially characterized in terms of mineralogical composition, particle size distribution, grindability characteristics, and work index. Next, a rheological characterization of actual and lab-created chalcopyrite mineral-slurries is performed. Finally, an energy consumption-based characterization of several chalcopyrite ball mill grinding processes is performed. The results from the initial mineralogical characterization indicate ore samples featuring 5% chalcopyrite. These results also highlight that 80% of the particles present in the chalcopyrite head ore have a diameter smaller than 1386 μm. In addition, they indicate that the Bond ball mill work index is equal to 15.3 kWh/ton, which corresponds to a mineral with the presence of chalcopyrite. The rheological characterization related results indicate that all actual and lab-created mineral-slurries exhibit a shear thinning rheological behavior. These results also show that, because of the higher number of particle interactions, the slurries’ apparent viscosity increases with the increase in their solids content. Finally, the energy consumption-based characterization results emphasize that energy consumption is more significantly affected by mill speed than by slurry solids content. Indeed, for the same percentage of mass passing through a 200 mesh, it is found that the specific grinding energy decreases with both the increase in slurry solids concentration and the decrease in mill speed. The results obtained in this work are consistent with findings made in previous studies. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Dissolution kinetics and solubilities of copper sulfides in cyanide and hydrogen peroxide leaching: applications to increase selective extractions(Elsevier, 2021-11-01)Accurate quantification of secondary and primary sulfide minerals is fundamental for resource evaluation, ore processing, and long-term sustainability of mining operations. In addition to visual mapping and automated mineral quantification, chemical analysis can also be harnessed to characterize the mineralogy of ore deposits. By evaluating the conditions in which certain minerals can be selectively dissolved from others, a chemical evaluation could provide geochemical speciation data of low-abundance minerals, such as copper/iron sulfides present in low-grade copper ores. The selective dissolution of copper sulfide minerals is, however, understudied. Here, we evaluate the use of potential selective dissolution conditions to differentiate supergene copper sulfides from hypogene copper sulfides. By characterizing the dissolution kinetics of chalcocite, covellite, bornite, enargite, chalcopyrite, and pyrite concentrates, we found that alkaline cyanidation (and not hydrogen peroxide or acid leaching in the presence of oxidizing agents) selectively dissolves supergene copper sulfides, which can be applied in a sequential extraction scheme to estimate the sulfide mineralogy of tailings samples. Cyanide completely dissolved chalcocite and covellite within 5–15 min, whereas dissolution in acid oxidative media only partially dissolved copper sulfides. Pyrite, chalcopyrite, enargite, and bornite under 0.5% KCN leaching (1 mg/mL) for 10 min showed approximately 1, 10, 30, and 40% of copper recovery, respectively. Cyanide leaching applied in sequential extractions of porphyry copper tailings samples from the Piuquenes impoundment, La Andina, Chile, improved the selective dissolution of secondary sulfides compared to a previously proposed hydrogen peroxide dissolution method, thus allowing their differentiation from primary sulfide minerals. The selective leaching of supergene sulfides by cyanidation provides a cheap and efficient method to estimate the copper sulfide mineralogy in copper ores, facilitating the sustainability and resource evaluation of mining operations. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Trace element geochemistry of sphalerite and chalcopyrite in arc-hosted VMS deposits(Elsevier, 2021-08-26)Trace element compositions of sphalerite and chalcopyrite have been investigated for four arc-hosted Cretaceous VMS deposits (María Teresa, Perubar, and Palma in Peru, and Cerro de Maimón in the Dominican Republic) using laser ablation inductively-coupled plasma mass spectrometry. In sphalerite, Fe, Mn, Cd, Hg, Ag, Sb, Se, In, Ge, and Ga are lattice-bound, whereas Sn, Tl, Bi, and Pb occur at least partly as mineral microinclusions. Significant variations in the contents of minor and trace elements are observed in sphalerite grains from individual deposits. A strong negative correlation between Fe (Inter-Quartile Range [IQR] 44,009–18,168 ppm) and Zn indicates a dominant Fe2+ ↔ Zn2+ simple isovalent substitution. Regarding potential high-tech by-products, the contents of In (IQR 42–1.6 ppm, up to 415 ppm) and Ga (IQR 31–5.9 ppm, up to 96 ppm) in the studied sphalerite are normally much higher than those of Ge (IQR 0.85–0.16 ppm, up to 9.3 ppm). Correlation trends suggest Cu+ + In3+ ↔ 2Zn2+, Cu+ + Ga3+ ↔ 2Zn2+, and more complex substitution mechanisms of Zn involving combinations of monovalent (Cu+, Ag+), divalent (Ge2+?), trivalent (In3+, Ga3+, [Sn3+?]), and quadrivalent (Ge4+, Sn4+) cations. As for chalcopyrite, Zn, Ag, Sn, Cd, Se, In, Ga, and Ge are interpreted to be lattice-bound, whereas Mo, Au, Tl, Sb, Pb, and Bi probably occur as microinclusions. Relative to sphalerite, chalcopyrite is depleted in In (IQR 28–8.4 ppm, up to 49 ppm) and Ga (IQR 8.3–2.9 ppm, up to 24 ppm) and enriched in Ge (IQR 5.9–0.70 ppm, up to 80 ppm). Of the other trace elements, Zn (IQR 426–190 ppm) is the most highly concentrated in the studied chalcopyrite, followed by Ag (IQR 136–23 ppm), Se (IQR 64–22 ppm), Sn (IQR 53–1.3 ppm), and Cd (IQR 12–6.0 ppm). General positive correlation trends between Zn, Cd, In, Ge, and Ga in chalcopyrite suggest varied coupled substitution mechanisms of Fe and Cu with fluctuating valences due to covalent bonding. Trace-element distribution patterns in sphalerite and chalcopyrite were studied for the zone-refined Sofía-D massive sulfide body in the María Teresa deposit, which comprises a lower lower portion of dominant pyrite sheathed upward by zones of chalcopyrite (Cu zone), sphalerite (Zn zone) and galena + sphalerite ± fahlore ± barite (Pb – Zn – Ag zone). Bottom to top of the sulfide body, sphalerite records progressive depletion in In, Cu, Mn, and Se, and enrichment in Ge. This distribution pattern agrees with increasing crystallization temperatures and/or volatile magmatic influx towards the lower portion of the massive mineralization. Distribution of trace elements in chalcopyrite is rather uneven except for a sustained enrichment in Se towards the basal portion of the sulfide body. The fact that such trends are preserved in spite of extensive recrystallization during thermal metamorphism in parts of the Sofía-D massive sulfide mineralization suggests i) a closed metamorphic system and ii) that element interdiffusion was prominently local. Accordingly, we propose that sphalerite lattice-bound trace elements distribution patterns described in this article can help determine the polarity of massive sulfide bodies in VMS districts in metamorphosed and tectonized terranes. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Distribution of indium, germanium, gallium and other minor and trace elements in polymetallic ores from a porphyry system: the Morococha district, Peru(Elsevier, 2021-09-01)We report indium, germanium, gallium, and other minor and trace elements contents in sphalerite, chalcopyrite, galena, and tetrahedrite-tennantite occurring in skarn and skarn-free (“Cordilleran”) polymetallic mantos and vein ore bodies in the Miocene porphyry-related Morococha District, Central Peru. Among the investigated minerals, LA-ICP-MS measurements indicate that In and Ga concentrate mostly in sphalerite (Inter-Quartile Range [IQR] 217–2.7 ppm and up to 4608 ppm In; IQR 61–2.0 ppm and up to 2137 ppm Ga) and chalcopyrite (IQR 109–32 ppm and up to 1070 ppm In; IQR 62–1.5 ppm and up to 630 ppm Ga). In coeval generations of sphalerite and chalcopyrite, the contents of In and Ga in sphalerite are at least two times higher than in chalcopyrite. Germanium content is generally low in the four analyzed minerals (IQR 1.2–0.19 ppm), although late Fe-poor sphalerite may yield much higher values (IQR 129–74 ppm). Certain trace element contents appear to correlate with (i) the evolving characteristics of the hydrothermal fluids during individual mineralization events, and (ii) the location of the studied ore bodies relative to the hydrothermal feeders. The highest In values in sphalerite are found in high-sulfidation assemblages in Cordilleran polymetallic veins and, with lower amounts, in low-sulfidation assemblages in skarn bodies. In intermediate-sulfidation assemblages in Cordilleran mineralization, In content decreases from early to late generations of sphalerite, while that of Ge increases. Spatial trace-element trends in Cordilleran veins and replacement bodies formed during the so-called “Morococha district-scale polymetallic event” include, from porphyry-distal to porphyry-proximal locations: i) In and Cu, and to a lesser extent Ga, enrichment in sphalerite; ii) Se and Hg enrichment and Sn and Ag depletion in chalcopyrite; iii) In enrichment in galena; and iv) Ag depletion in tetrahedrite-tennantite. Our dataset suggests that In is incorporated in the sphalerite crystal lattice via coupled substitutions involving Cu and subordinately also Sn and Ag. Availability of Cu in the mineralizing fluids is therefore key to In enrichment in sphalerite. Progressive dilution of metal-rich magmatic-hydrothermal fluids and Cu precipitation probably account for the progressive In depletion in distal-to-porphyry Zn-Pb-Ag and Ag-Pb Cordilleran polymetallic mineralization and in late sphalerite generations in intermediate-sulfidation assemblages.