3. Producción
Browse
39 results
Search Results
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, An interdisciplinary approach to identify zones vulnerable to earthquakes(Elsevier, 2020-09-01)Earthquakes in Peru are responsible for enormous material and human losses. One of the reasons for the latter is that risk and disaster management policies do not consider individuals as a significant factor for planning post-disaster activities. An understanding of all-important aspects that influence post-disaster efforts would reduce the number of dead, injured and affected people as well as the required money and time to invest. This research develops an interdisciplinary approach, based on seismic vulnerability, to identify those zones that need immediate attention after an earthquake. We consider vulnerability to be a result of two dimensions: social and physical. The first describes society by its anthropogenic characteristics through social indicators (age, daily income, education, etc.). The second describes the built environment and the main features of infrastructure. The results show that the physical and social dimensions intersect and interact with fairly consistent regularity. Thus, we are then able to more accurately identify the areas that require higher prioritization in an emergency scenario. Having this data available for regions predisposed to earthquakes will allow for substantial improvements to current risk mitigation action plans as well as the promotion of a more comprehensive prevention effort. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Reviewing environmental life cycle impacts of biobased polymers: current trends and methodological challenges(Springer, 2020-11-01)Purpose: The aim of this review is to evaluate previous life cycle assessment (LCA) studies of first- and second-generation bioplastics, to understand the state of the art and the main problems addressed during the development of new bioplastics. Furthermore, it provides an overview on land use change (LUC) impacts accounted for, methodologies chosen, and the results obtained. Methods: Studies related to the impact assessment of bioplastics and published between 2007 and 2018 were gathered. Five keyword strings were used to perform a wide search and select relevant LCA studies. The study aimed to analyze critical methodological aspects in LCA, in order to determine the most common choices made during biobased material analyses, as well as major limitations. Three filters were applied to select comparable studies, ending with a final number of 17 papers. Recommendations were obtained by comparing common practices performed by different authors with suggested best available practices mentioned in handbooks and guidelines. Interestingly, LUC metrics and impacts were, most of the time, neglected. Thus, a specific assessment and discussion was performed regarding the methods used to quantify LUC impacts, considering its importance during the production of biobased materials. Results and discussion: The study discussed the main environmental problems linked to the development of new biomaterials. LCA of agricultural products or systems, when compared with fossil-based counterparts, is expected to show higher environmental impacts in categories directly affected by fertilizer use, occupied and transformed land, among others. Thus, studies that included additional impact categories besides global warming (e.g., eutrophication or acidification) concluded that biobased materials present higher impacts, recommending improvements in farming practices to improve their overall environmental profile. Moreover, this review gathered methodologies used to account for LUC impacts and the results obtained. The main constraint of including LUC impacts was the lack of a standardized methodology, as well as large uncertainties in existing methodologies. Conclusions: Most studies concluded that improvements in farming practices might reduce the attributed environmental impacts with the reduction of the amount of land, fertilizer, pesticides, and water used. Studies computing LUC impacts agreed on the importance of including these impacts and concluded that greenhouse gas emissions of bioplastic production would increase, but in most cases would still be lower than the impact of their fossil-based counterparts. However, challenges remain when computing LUC impacts that need to be tackled when working with the available methodologies, including the collection of reliable inventory data (site-specific or regional data) and regionalized characterization factors. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Food waste management during the COVID-19 outbreak: a holistic climate, economic and nutritional approach(Elsevier, 2020-11-10)Improving the food supply chain efficiency has been identified as an essential means to enhance food security, while reducing pressure on natural resources. Adequate food loss and waste (FLW) management has been proposed as an approach to meet these objectives. The main hypothesis of this study is to consider that the “strong fluctuations and short-term changes” on eating habits may have major consequences on potential FLW generation and management, as well as on GHG emissions, all taking into account the nutritional and the economic cost. Due to the exceptional lockdown measures imposed by the Spanish government, as a consequence of the emerging coronavirus disease, COVID-19, food production and consumption systems have undergone significant changes, which must be properly studied in order to propose strategies from the lessons learned. Taking Spain as a case study, the methodological approach included a deep analysis of the inputs and outputs of the Spanish food basket, the supply chain by means of a Material Flow Analysis, as well as an economic and comprehensive nutritional assessment, all under a life cycle thinking approach. The results reveal that during the first weeks of the COVID-19 lockdown, there was no significant adjustment in overall FLW generation, but a partial reallocation from extra-domestic consumption to households occurred (12% increase in household FLW). Moreover, the economic impact (+11%), GHG emissions (+10%), and the nutritional content (−8%) complete the multivariable impact profile that the COVID-19 outbreak had on FLW generation and management. Accordingly, this study once again highlights that measures aimed at reducing FLW, particularly in the household sector, are critical to make better use of food surpluses and FLW prevention and control, allowing us to confront future unforeseen scenarios. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Life cycle assessment of bagasse fiber reinforced biocomposites(Elsevier, 2020-06-10)This study aims to evaluate the life cycle environmental implications of producing fiber-reinforced biocomposite pellets, compared with sugarcane- and petroleum-based polyethylene (PE) pellets. Life Cycle Assessment (LCA) methodology is used to evaluate the production of four types of pellets. LCA allows the evaluation of the benefits of improving the production of biobased materials by replacing part of the sugarcane bioPE with bagasse fibers. The functional unit selected was the production of 1 kg of plastic pellets. Primary data were collected from laboratory tests designed to obtain pulp fibers from bagasse and mix them with sugarcane bioPE. Two processes were studied to obtain fibers from bagasse: soda fractionation and hot water-soda fractionation. The results from the LCA show environmental improvements when reducing the amount of bioPE by replacing it with bagasse fibers in the categories of global warming, ozone formation, terrestrial acidification and fossil resource scarcity, when comparing to 100% sugarcane bioPE, and a reduction in global warming and fossil resource scarcity when compared to fossil-based PE. In contrast, results also indicate that there could be higher impacts in terms of ozone formation, freshwater eutrophication, and terrestrial acidification. Even though biocomposites result as a preferred option to bioPE, several challenges need to be overcome before a final recommendation is placed. The sensitivity analysis showed the importance of the energy source on the impacts of the processing of fibers. Thus, using clean energy to produce biobased materials may reduce the impacts related to the production stage. These results are intended to increase the attention of the revalorization of these residues and their application to generate more advanced materials. Further outlook should also consider a deeper evaluation of the impacts during the production of a plastic object and possible effects of the biobased materials during final disposal. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Climate action and food security: strategies to reduce GHG emissions from food loss and waste in emerging economies(Elsevier, 2021-07-01)Peru struggles to upgrade its waste management, with landfilling only just overtaking open dumpsters as the main disposal method. Despite the benefits of this transition, including reduced environmental impacts to water and soil, previous studies demonstrated that greenhouse gas (GHG) emissions may increase if adequate levels of technological sophistication are not implemented. Considering that 58% of municipal solid waste (MSW) is organic, it seems plausible that a relevant portion of emissions can be linked directly to food loss and waste (FLW) management. This study aims to determine the GHG emissions mitigation potential in FLW compared to the current baseline scenario in 24 Peruvian cities, by modelling alternative technologies to treat organic MSW. Life cycle modelling was performed using the waste-LCA software EASETECH. Five treatment scenarios were modelled: i) open dumping; ii) landfilling with no gas treatment; iii) landfilling with landfill gas treatment; iv) landfilling with energy recovery; and, v) anaerobic digestion. GHG emissions of FLW generation proved to be substantially higher than those for FLW treatment. However, if sophisticated technologies are implemented in FLW treatment, an annual reduction of up to 1.56 Mt CO2eq could be attained. Moreover, despite the health and environmental benefits of a transition to optimized diets, in which, for example, meat consumption is reduced and vegetables are boosted, an important increase in FLW and, therefore, an increase in GHG emissions in the treatment phase is shown. However, if certain technologies, such as energy recovery or anaerobic digestion, were implemented, most carbon losses would be avoided.8 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Introducing environmental decision-making criteria to foster green public procurement in Peru(Wiley, 2021-07-01)Governments in the Global South have recently started to align their public procurement regulations considering Green Public Procurement (GPP) guidelines to achieve Sustainable Development Goal 12. In this context, it is important to establish environmental criteria to help decision making after analyzing the variety of options available in the market. Thus, using as examples two of the most acquired products in public procurement in Peru: Medium-density particleboard melamine furniture and paper offset, the aim of this paper is to determine the main environmental hotspots and therefore show the path to foster GPP in Peru. To achieve this goal, a Life Cycle Assessment was carried out considering it is a suitable environmental management tool to quantify environmental impacts. For this, a set of scenarios were modeled and compared for each of the two products selected, covering different geographical and technological options that are currently purchased by the Peruvian government. Results demonstrated that it is possible to attain considerable reductions in the environmental impact of the products analyzed if the main critical stages throughout their life cycle are identified and adequate solutions are applied to avoid burden shifting. Moreover, we argue that it is important for developing countries to carry out case-specific life-cycle inventories as they provide higher-quality information based on the particular characteristics of regional or local industries, allowing the determination of more realistic environmental impact mitigation benchmarks. Nevertheless, the inclusion of lifecycle-based criteria in GPP must be performed cautiously, avoiding command and control regulations, as numerous challenges remain in terms of capacity building, environmental awareness, and environmental information, and transparency in emerging and developing economies. Integr Environ Assess Manag 2022;18:1206–1220. © 2021 SETAC KEY POINTS Latin American governments are currently aligning their public procurement regulations with Green Public Procurement (GPP) guidelines to comply with international environmental recommendations, such as Sustainable Development Goals (SDGs) or nationally determined contributions (NDCs). Considering that these nations struggle to develop empirical data to support GPP initiatives, Life Cycle Assessment (LCA) is presented as an attractive environmental management tool to quantify environmental impacts and orient GPP regulations. Two of the most acquired public procurement products in Peru, melamine furniture and paper offset, were evaluated using LCA to identify environmental hotspots, the sensitivity of the results through scenario analysis, and improvement actions to mitigate greenhouse gas emissions and other environmental impacts. Despite the existing challenges linked to building environmental information in Peru, case-specific life-cycle inventories for regional industries have proved to allow the determination of realistic environmental impact mitigation benchmarks to include in GPP. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Microplastics in fisheries and aquaculture: implications to food sustainability and safety(Elsevier, 2021-06-01)Plastic waste has arisen as a worldwide environmental concern, becoming ubiquitous in all marine compartments. Microplastics (MPs) are an important fraction of this accumulation, due to direct emissions from the technosphere or fragmentation of macroplastic waste. Consequently, the aim of this letter is to analyze the effects of microplastics on fishing and aquaculture, identifying the links with food safety and sustainability. Current studies have observed multiple potentially damaging effects of microplastics on marine biota, mainly at lower trophic levels. It is plausible to assume that fishing stocks and aquaculture systems will suffer setbacks due to these damages. However, additional research is needed to understand the potential effects on human health, especially considering that smaller microplastics and nanoplastics, for which data is very scarce, are the particles most likely to be absorbed by human tissues. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, District-level analysis for household-related energy consumption and greenhouse gas emissions: a case study in Lima, Peru(Elsevier, 2021-11-25)Given the significant contribution of households in terms of energy use and greenhouse gas (GHG) emissions, in addition to the increasing rate of urbanization and growth in developing countries, urban dwellings need to be analyzed in greater depth in order to implement sound policy-making based on informed decisions. Thus, the aim of this study is to quantify the household-related energy use and associated GHG emissions in the city of Lima, Peru, between 2007 and 2015. In order to understand the emission patterns within the city, a further analysis on smaller spatial scales (i.e., districts) has been performed using multiple regression analyses. Results show that household-related energy consumption and emissions, excluding those related to private vehicles, ranged from 2.92 to 3.22 GJ/cap/year and 187 to 249 kg CO2eq/cap/year, respectively. Overall, there is a transition in the use of energy and emissions, sustained by an increase in population and a change in the economic status of part of the population. Moreover, liquefied petroleum gas, rather than electricity, was found to be the main energy source in lower-income households. This study aims to help integrate household energy behavior with strategies for sustainable cities and provide a starting point to connect with climate policies. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Wastewater treatment decentralization: is this the right direction for megacities in the Global South?(Elsevier, 2021-07-15)The centralization-decentralization dichotomy in wastewater treatment management has been a recurrent topic of discussion in the urban context. The escalation of environmental hazards linked to increasing mismanaged wastewater flows in emerging or developing cities has vivified this conundrum. It is argued that there is a wide range of parameters to identify the optimal level of centralization-decentralization that must be implemented. In many cases, this prevents decision-makers from having a clear picture of the most appropriate management choices that must be undertaken. Hence, the main objective of the current discussion consists of an in-depth comparison between centralized wastewater treatment systems and decentralized systems with source separation in urban environments of the Global South. Moreover, a set of actions that should be considered in order to upgrade wastewater treatment systems amidst the existence of numerous economic, social and environmental constraints are analyzed. Considering the constraints of megacentralization as a preferred option, we argue that decision-makers should restrain from entering a centralization-decentralization dichotomy, seeing the process as a gradient between the two concepts. In fact, we advocate combining the benefits of each of the two perspectives to generate an adaptive management, site-specific solution for urban environments. For this, the inclusion of quantitative management tools, such as life-cycle environmental or cost management methodologies, in multi-objective optimization models, constitutes an interesting path forward towards fostering comprehensive policy support. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Prevalence of microplastics in the ocean in Latin America and the Caribbean(Elsevier, 2021-12-12)The release of microplastics to the ocean is an increasing global environmental concern. The specific characteristics of the Global South (e.g., widespread mismanaged waste and wastewater) make this an even greater challenge. The current study performed a critical review related to the prevalence of microplastics in the ocean in Latin America and the Caribbean, analyzing also the possible sources of microplastics release to the marine environment. A majority of the studies assessed point towards mismanaged waste, inland or offshore, as well as mismanaged wastewater as critical sources of plastic pollution into the ocean. However, there is a need to delve into the effects that these microplastics are generating on local biota and human health.