3. Producción
Browse
4 results
Search Results
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Experimental and numerical evaluation of a stackable compressed earth block masonry system: Characterization at cyclic shear loads(Elsevier Ltd, 2022-11-15)Soil is a traditional construction material that is currently experiencing a new boom as an eco-sustainable alternative for housing. In this article, a structural system made up of compressed earth blocks is analyzed as a construction alternative for seismic countries. This study evaluated the physical properties of base soil as well as an optimization process for the chemical stabilization of the mixture using cement and lime. The mechanical characterization of the blocks and of a masonry system designed to be stackable and dry joint was also performed, including the evaluation of its seismic response to cyclic shear wall tests. Results indicate that it is possible to improve the workability of the stabilized soil mixtures and the mechanical behavior of blocks in compression and tension, by using cement-lime additives in a ratio of 1:3 with respect to the dry weight of the materials. In addition, it was found that it is feasible to produce a stackable masonry system that has the capacity to dissipate energy due to friction between blocks. The parametric analysis and the calibration process of numerical models performed for the cyclic shear tests highlight the importance of using a micro-modeling approach to obtain representative models that correctly predict the experimental capacity curve in both maximum load and ductility. The use of those models in the present study allowed to adequately replicate the concentration of damage in the joints between blocks, corroborating what was observed through experimental testing. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Eco-friendly additive construction: Analysis of the printability of earthen-based matrices stabilized with potato starch gel and sisal fibers(Elsevier Ltd, 2022-09-12)3D printing for construction purposes is a disruptive technology with the potential for rapid and massive applications making it a feasible alternative for social housing, temporary shelters after disasters, and, recently, for extraterrestrial habitats. However, most of the matrices used for construction by 3D printing are based on hydraulic cement as the main constituent, which is not easily available in remote locations and is an important greenhouse gases generator. Therefore, a good understanding to formulate and evaluate alternative matrices using soil and organic materials with the required fresh and hardened-state properties compatible with this emerging technology is needed. This article studies the printable capabilities of eco-friendly earthen-based matrices which uses potato starch as a natural stabilizer for raw soil mortars aiming to obtain 3D printed filaments with adequate fresh and hardened-states properties. The aqueous starch gel was combined with sisal fibers in the printing mixture to control shrinkage cracking problems during hardening. The optimization of the dosage of the stabilizer was carried out considering different tests in fresh and hardened printed filaments namely, pumpability and extrudability, stacking, shear vane, shrinkage cracking, Vicat needle, compression strength, and capillarity absorption tests. The results indicate that printable earthen-based matrices reinforced with 1 % of sisal fibers by weight of soil and stabilized with aqueous starch gels with concentrations up to 5 % (w/w) showed improved workability and minor cracking and can be used for 3D printing. These promising results in the field of material science combined with novel 3D printing technology that is also presented in the article open new lines of research for eco-friendly alternatives for the construction industry. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Evaluation of Chitosan and Potato Starch as Stabilizers to Improve the Mechanical and Water Durability Properties of Printable Earth-Based Matrices Reinforced with Sisal Fibers(Trans Tech Publications Ltd, 2023-01-01)Due to economic, sustainable, and aesthetic benefits, academia and the construction industry are exploring the use of earth in modern construction is being widely studied. Unfortunately, earth as a construction material has low mechanical, poor water durability resistance, and the potential to swell and crack. Therefore, this paper evaluates chitosan and potato starch, natural biodegradable polymers, as stabilizers to improve mechanical strength and water durability resistance of printable earth-based matrix reinforced with sisal fibers. Although the test results indicated that the chitosan had a better performance as an earth stabilizer than potato starch, adding both stabilizers resulted in earthen composites with higher compressive strength and lower water permeability. These results demonstrate the feasibility of using natural stabilizers to improve the performance of earth-based materials for 3D printing without affecting their printability capacities. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Additive Construction Using Enhanced Earthen-Based Composites: Improvement of the Mechanical Strength and Water Durability Using Chitosan and Agave Fibers(RELX Group (Netherlands), 2023-01-01)