3. Producción
Browse
4 results
Search Results
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Strain and grain size of CeO2 and TiO2 nanoparticles: comparing structural and morphological methods(MDPI, 2021-06-07)Various crystallite size estimation methods were used to analyze X-ray diffractograms of spherical cerium dioxide and donut-like titanium dioxide anatase nanoparticles aiming to evaluate their reliability and limitations. The microstructural parameters were estimated from Scherrer, Monshi, Williamson-Hall, and their variants: i) uniform deformation model, ii) uniform strain deformation model, and iii) uniform deformation energy density model, and also size-strain plot, and Halder-Wagner method. For that, and improved systematic Matlab code was developed to estimate the crystallite sizes and strain, and the linear regression analysis was used to compare all the models based on the coefficient of determination, where the Halder Wagner method gave the highest value (close to 1). Therefore, being the best candidate to fit the X-ray Diffraction data of metal-oxide nanoparticles. Advanced Rietveld was introduced for comparison purposes. Refined microstructural parameters were obtained from a nanostructured 40.5 nm Lanthanum hexaboride nanoparticles and correlated with the above estimation methods and transmission electron microscopy images. In addition, electron density modelling was also studied for final refined nanostructures, and μ-Raman spectra were recorded for each material estimating the mean crystallite size and comparing by means of a phonon confinement model. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Effect of the concentration and the type of dispersant on the synthesis of copper oxide nanoparticles and their potential antimicrobial applications(American Chemical Society, 2021-07-27)High Resolution Image Download MS PowerPoint Slide The bactericidal properties of copper oxide nanoparticles have growing interest due to potential application in the medical area. The present research investigates the influence of sodium dodecyl sulfate (SDS) and poly(vinylpyrrolidone) (PVP) on the production of copper oxide nanoparticles prepared from copper sulfate (CuSO 4 ) and sodium borohydride (NaBH 4 ) solutions. Different analytical techniques were used to determine the crystal nature, mean size diameter, and surface morphology of the copper oxide nanoparticles. The X-ray diffraction (XRD) patterns showed formation of nanoparticles of cuprite (Cu 2 O) and tenorite (CuO) when PVP and SDS were added at the beginning of the reaction. In fact, when the Cu/PVP ratio was 1.62, Cu 2 O nanoparticles were obtained. In addition, nanoparticles of CuO were synthesized when the Cu/PVP ratios were 0.54 and 0.81. On the other hand, a mixture of copper oxides (CuO and Cu 2 O) and cuprite (Cu 2 O) was obtained when PVP (Cu/PVP = 0.81 and 1.62) and SDS (Cu/SDS = 0.90) were added 30 min after the beginning of the reaction. Transmission electron microscopy (TEM) images show agglomerated nanoparticles with a size distribution ranging from 2 to 60 nm, while individual particles have sizes between 4.1 ± 1.9 and 41.6 ± 12.8 nm. The Kirby–Bauer method for the determination of antibacterial activity shows that small CuO (4.1 ± 1.9 nm) and Cu 2 O (8.5 ± 5.3 nm) nanoparticles inhibit the growth of Escherichia coli, Staphylococcus aureus MRSA, S. aureus and Pseudomonas aeruginosa bacteria. The antibacterial test of cotton fabric impregnated with nanoparticles shows positive results. The determination of the optimal ratio of copper oxide nanoparticles per cm 2 of fabric that are able to exhibit a good antibacterial activity is ongoing.1 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Theory of Phase-Adaptive Parametric Cooling(American Physical Society, 2023-05-01)We propose an adaptive phase technique for the parametric cooling of mechanical oscillators. Our scheme calls for a sequence of periodic adjustments of the phase of a parametric modulation of the mechanical oscillator that is conditioned on measurements of its two quadratures. The technique indicates an exponential loss of thermal energy at initial high occupancies, similar in performance to other optomechanical techniques such as cold-damping or cavity self-cooling. As the quantum ground state is approached, the phase adaptive scheme leads to residual occupancies at the level of a few phonons owing to the competition between parametric amplification of quantum fluctuations and the feedback action. - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Tailoring the Properties of Magnetite/PLA Nanocomposites: A Composition-Dependent Study(Multidisciplinary Digital Publishing Institute (MDPI), 2025)This study focused on composites of magnetite magnetic nanoparticles (MNP) and poly(lactic acid) (PLA) prepared via sonochemical synthesis. The evaluation of MNP loadings (2, 5, 10, 15, and 20 wt.%) provided insights into the structural and reactivity properties of the materials. Methods used included XRD, FT-IR and Raman spectroscopy, SEM and TEM microscopy, textural and thermal analysis (TG and DTA), and magnetic property measurements. The agreement between theoretical and experimental MNP loadings was good. XRD patterns showed predominantly MNP and semicrystalline phases, with a minor maghemite phase detected by FT-Raman and magnetic measurements. FT-IR analysis revealed interactions between MNP and PLA, confirmed by thermal analysis showing higher transition temperatures for the composites (145 °C) compared to pure PLA (139 °C). FT-Raman spectra also indicated that PLA helps prevent iron oxide oxidation, enhancing nanoparticle stability. SEM and TEM micrographs showed well-dispersed, spherical nanoparticles with minimal agglomeration, dependent on MNP loading. The nanocomposites exhibited low N₂ adsorption, resulting in low surface area (~2.1 m²/g) and porosity (~0.03 cm³/g). Magnetic analysis indicated that in the 2MNP/PLA sample, MNP were in a superparamagnetic-like regime at 300 K, suggesting good dispersion of 2 wt.% MNP in the PLA matrix.1